Superficial Surface Treatment using Atmospheric Plasma on Recycled Nylon 6,6

Authors

  • M. Rodríguez Faculty of Chemical Sciences and Engineering (FCQeI), UAEMor, CP 62210, Cuernavaca, Morelos, México; Institute of Physical Sciences, National Autonomous University of México. Av. Universidad #1000, Col. Chamilpa, CP 62210, Cuernavaca, Morelos, México https://orcid.org/0000-0002-4604-9315
  • E. Vázquez-Vélez Institute of Physical Sciences, National Autonomous University of México. Av. Universidad #1000, Col. Chamilpa, CP 62210, Cuernavaca, Morelos, México https://orcid.org/0000-0002-2154-0116
  • H. Martinez Institute of Physical Sciences, National Autonomous University of México. Av. Universidad #1000, Col. Chamilpa, CP 62210, Cuernavaca, Morelos, México https://orcid.org/0000-0002-0695-3457
  • A. Torres Faculty of Chemical Sciences and Engineering (FCQeI), UAEMor, CP 62210, Cuernavaca, Morelos, México https://orcid.org/0000-0001-7102-0138

DOI:

https://doi.org/10.15415/jnp.2021.82025

Keywords:

Polyamide, Surface, Coatings, Atmospheric pressure plasma

Abstract

Polymers currently represent materials that are cost-effective, while its recycled nature is significant in terms of environmental protection. However, the surface properties of polymers often do not meet the demands of wettability, adhesion, and friction, among others. Atmospheric plasma treatment on the surface of polymers improves its physical-chemistry properties. In this work, a recycled nylon coating was prepared by the spin coating technique and characterized by Fourier transform infrared spectroscopy and X-ray diffraction. This coating was treated by atmospheric plasma, and Raman spectroscopy was performed to analyze the signals related to different functional groups present in the coating surface after plasma treatment. The action of plasma on the surface morphology was observed by scanning electron microscopy. The contact angle results showed an improvement in surface wettability.

Downloads

Download data is not yet available.

References

M. Hinojosa, V. González, J. Sánchez and U. Ortiz, Polymer 45, 4829 (2004). https://doi.org/10.1016/j.polymer.2004.04.069

E Hermida, Chapter 9. Didactic guide. Ministry of Education. National Institute of Education Technological. Argentine Republic: Polymers, (2011).

A. Pérez, E. Ferrás, M. Pérez and J. Fernández, Magazine Cuban Chemistry 26, 166 (2014).

C.V. Pious and S. Thomas, 2 - Polymeric Materials—Structure, Properties, and Applications, edited by J. Izdebska and S. Thomas, Printing on Polymers, William Andrew Publishing, pp.21-39, (2016). https://doi.org/10.1016/B978-0-323-37468-2.00002-6

D.K. Platt, Industrial applications for engineering and high performance plastics, Engineering and high performance plastics, Market Report, Rapra Technology (Smithers), pp.55-83, (2003).

J. Charles, G. Ramkumaar, S. Azzhagiri and S. Gunasekaran, Journal of Chemistry 6, 23 (2009). https://doi.org/10.1155/2009/909017

A. Baldan, Journal of Materials Science 39, 1 (2004). https://doi.org/10.1023/B:JMSC.0000007726.58758.e4

R.F. Wegman and J. Van Twisk, Plastics, surface preparation techniques for adhesive bonding (2nd edition), Elsevier, pp.109-126, (2013).

I.J. Zvonkina, Adhesion of Polymer Coatings: Principles and Evaluation, edited by M. Hosseini and A. Makhlouf (eds.), Industrial Applications for Intelligent Polymers and Coatings, Springer, Cham (2016). https://doi.org/10.1007/978-3-319-26893-4_28

Z. Gao, J. Sun, S. Peng, L. Yao and Y. Qiu, Applied Surface Science 256, 1496 (2009). https://doi.org/10.1016/j.apsusc.2009.09.010

F. Arefi, J. Kurdi, M. Tatoulian and J. Amouroux, Surface and Coatings Technology 142-144, 437 (2001). https://doi.org/10.1016/S0257-8972(01)01240-3

L. Zhu, W. Teng, H. Xu, Y. Liu, Q. Jiang, C. Wang, and Y. Qiu, Surface and Coatings Technology 202, 1966 (2008). https://doi.org/10.1016/j.surfcoat.2007.08.046

R. Foerch and D.H. Hunter, Journal of Polymer Science Part A: Polymer Chemistry 30, 279 (1992). https://doi.org/10.1002/pola.1992.080300212

A.A. Bujanda, C. Wu, J.D. Demaree, E.J. Robinette, A. Weerasooriya and D. Flanagan, Atmospheric Plasma Treatment of Nylon 6,6 for Improved Interfacial Adhesion in Thermoplastic Composites, edited by T. Sano and T.S. Srivatsan (eds) Advanced Composites forAerospace, Marine, and Land Applications II. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-48141-8_20

C. Mandolfino, E. Lertora, S. Genna, C. Leone and C. Gambaro, Procedia CIRP 33, 458 (2015). https://doi.org/10.1016/j.procir.2015.06.054

N. Perkas, G. Amirian, S. Dubinsky, S. Gazit and A. Gedanken, Journal of Applied Polymer Science 104, 1423 (2007). https://doi.org/10.1002/app.24728

F. Khelifa, S. Ershov, Y. Habibi, R. Snyders and P. Dubois, Chemical Reviews 116, 3975 (2016). https://doi.org/10.1021/acs.chemrev.5b00634

S. Nourbakhsh, Journal of Laser Applications 27, 012005 (2015). https://doi.org/10.2351/1.4902832

M. Peng, L. Li, J. Xiong, K. Hua, S. Wang and T. Shao, Coatings 7, 123 (2017). https://doi.org/10.3390/coatings7080123

C.X. Wang, M. Du, J.C. Lv, Q.Q. Zhou, Y. Ren, G.L. Liu, D.W. Gao and L.M. Jin, Applied Surface Science 349, 333 (2015). https://doi.org/10.1016/j.apsusc.2015.05.036

H. Lee, I. Ohsawa and J. Takahashi, Applied Surface Science 328, 241 (2015). https://doi.org/10.1016/j.apsusc.2014.12.012

C. Mandolfino, E. Lertora and C. Gambaro, Surface & Coatings Technology 313, 222 (2017). https://doi.org/10.1016/j.surfcoat.2017.01.071

M. Chacon, A. Pacheco, M. Cendejas and F. Ortega, Magazine of Environmental Sciences and Natural Resources 2, 63 (2016).

H. Zhang and M. Chen, Journal of Material Cycles & Waste Management 16, 187 (2014). https://doi.org/10.1007/s10163-013-0180-3

R. Macazaga, Business Interface 2, 7 (2011).

C. Córdoba, J. Mera, J. Rodríguez and D. Martínez, Investigium Magazine: Humaministic Social Sciences 1, 60 (2010).

N. Vasanthan, Journal of Chemical Education 89, 387 (2012). https://doi.org/10.1021/ed200398m

M. Mehrabanian and M. Nasr-Esfahani, International Journal of Nanomedicine 6, 1651 (2011). https://doi.org/10.2147/IJN.S21203

M. Elgegren, G. Tiravanti, B. Ortiz, M. Otero, F. Wagner, D. Cerrón and J. Nakamatsu, Magazine of the Chemical Society of Peru 78, 105 (2012).

M. Domínguez-Díaz, J. Escorcia-García and H. Martínez, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 447, 84 (2019). https://doi.org/10.1016/j.nimb.2019.03.041

W. Maddams and I.A.M. Royaud, Spectrochimica Acta Part A: Molecular Spectroscopy 47, 1327 (1991). https://doi.org/10.1016/0584-8539(91)80223-6

D. Bertololdo, A. Reyer and M. Musso, Spectrochimica Acta Part A: Molecular & Biomolecular Spectroscopy 190, 433 (2018). https://doi.org/10.1016/j.saa.2017.09.055

R.S. Hebbar, A.M. Isloor and A.F. Ismail, Chapter 12 - Contact Angle Measurements, edited by N. Hilal, A.F. Ismail, T. Matsuura and D. Oatley-Radcliffe, Membrane Characterization, Elsevier, pp. 219-255, (2017). https://doi.org/10.1016/B978-0-444-63776-5.00012-7

F. Zabihi, Y. Xie, S. Gao and M. Eslamian, Applied Surface Science 338, 163 (2015). https://doi.org/10.1016/j.apsusc.2015.02.128

H. Mahdi, Ibn AL- Haitham Journal For Pure and Applied Science 24, (2011).

C. Ramesh and E.B. Gowd, Macromolecules 34, 3308 (2001). https://doi.org/10.1021/ma0006979

K.S. Siow, L. Britcher, S. Kumar and H.J. Griesser, Plasma Processes & Polymers 3, 392 (2006). https://doi.org/10.1002/ppap.200600021

Downloads

Published

2021-02-10

How to Cite

(1)
Rodríguez, M. .; Vázquez-Vélez, E. .; Martinez, H. .; Torres, A. . Superficial Surface Treatment Using Atmospheric Plasma on Recycled Nylon 6,6. J. Nucl. Phy. Mat. Sci. Rad. A. 2021, 8, 191-196.

Issue

Section

Articles