Optimization of the Position of the CR-39 Polycarbonate Sheet Inside the Solid State Track Detector “Measuring Device” Through Computational Fluid Dynamics Technique

Authors

  • A. Lima Flores Faculty of Physical Mathematical Sciences, Meritorious Autonomous University of Puebla (BUAP), San Claudio Avenue and 18th south street, Puebla-72570, Mexico https://orcid.org/0000-0003-4128-1681
  • R. Palomino-Merino Faculty of Physical Mathematical Sciences, Meritorious Autonomous University of Puebla (BUAP), San Claudio Avenue and 18th south street, Puebla-72570, Mexico
  • V. M. Castaño Center for Applied Physics and Advanced Technology, National Autonomous University of Mexico, Juriquilla Boulevard number 3001, 76230 Santiago De Querétaro, Querétaro, Mexico
  • J. I. Golzarri Instituto de Física, Universidad Nacional Autónoma de México, Cd. de México 04520 México; Institute of Physics, National Autonomous University of Mexico (UNAM), Mexico City, Mexico
  • G. Espinosa Instituto de Física, Universidad Nacional Autónoma de México, Cd. de México 04520 México; Institute of Physics, National Autonomous University of Mexico (UNAM), Mexico City, Mexico

DOI:

https://doi.org/10.15415/jnp.2021.82013

Keywords:

Nuclear Track Methodology (NTM), CR-39 polycarbonate sheet, Computational Fluid Dynamics (CFD), Indoor Radon

Abstract

The “measuring device” is one of the most reliable, efficient and economic indoor radon dosimeters that exist. This device was developed by the Proyecto de Aplicaciones de la Dosimetría (PAD) at the Physics Institute of UNAM (IF-UNAM) and consists of a transparent rigid plastic cup, a CR-39 polycarbonate sheet and a standard size metal clip that is used to hold the polycarbonate in the center of the cup. The cup is wrapped and covered with a low-density polyurethane protector in order to prevent the detector from being irradiated by ionizing particles found in the environment. In this work, an analysis was carried out that allowed to understand how the radon concentration on the polycarbonate sheet varies when its height is changed with respect to the base of the plastic cup, in order to understand what position increase the probability of interaction between radon and the surface of the detector. For the development of this work, four computational simulations were performed with the technique called Computational Fluid Dynamics (CFD). The results shows that as the CR-39 is positioned more closed to the base of the cup, the probability of interaction of the radon and the detector increase. Based on these results it is concluded that, when there is a limit in the time in which a measuring device can be placed in the zone where it is desired to quantify indoor radon, it is recommended to collocated the CR-39 at 1 cm with respect to the base of the cup.

Downloads

Download data is not yet available.

References

G. Espinosa, Nuclear Tracks in Solids (Federal District: National Autonomous University of Mexico 1994).

R.L. Fleischer, P.B. Price, and R.M. Walker, Nuclear tracks in solids, principles and applications. Berkeley, California: University of California Press, 1975.

G. Espinosa and S. Ramos, Journal of Radioanalytical and Nuclear Chemistry 161, 307 (1992). https://doi.org/10.1007/BF02040477

Y.-G Li, Y.-Q Shi, Y.-B Zhang and P. Xia, Radiation Measurements 34, 589 (2001). https://doi.org/10.1016/S1350-4487(01)00234-7

Y. Zhang, H.-W. Wang, Y.-G. Ma, L.-X. Liu, X.-G. Cao, G.-T. Fan, G.-Q. Zhang and D.-Q. Fang, Nuclear Science and Techniques 30, 87 (2019). https://doi.org/10.1007/s41365-019-0619-x

M. El Ghazaly and N.M. Hassan, Nuclear Engineering and Technology 50, 432 (2018). https://doi.org/10.1016/j.net.2017.11.010

N. Sinenian, M.J. Rosenberg, M. Manuel, S.C. McDuffee, D.T. Casey, A.B. Zylstra, H.G. Rinderknecht, M. Gatu Johnson, F.H. Séguin, J.A. Frenje, C.K. Li and R.D. Petrasso, Review of Scientific Instruments 82, 103303 (2011). https://doi.org/10.1063/1.3653549

A. Lima-Flores, R. Palomino-Merino, E. Espinosa, V.M. Castaño, L. Guzman-Gatica and G. Espinosa, J. Nucl. Phy. Mat. Sci. Rad. A. 5, 65 (2017). https://doi.org/10.15415/jnp.2017.51007

A. Lima Flores, R. Palomino-Merino, E. Espinosa, V.M. Castaño, E. Merlo Juarez, M. Cruz Sánchez and G. Espinosa, J. Nucl. Phy. Mat. Sci. Rad. A 4, 77 (2016). https://doi.org/10.15415/jnp.2016.41008

G. Espinosa and R.B. Gammage, Applied Radiation and Isotopes 44, 719 (1993). https://doi.org/10.1016/0969-8043(93)90138-Z

A. Lima Flores, R. Palomino-Merino, V.M. Castaño and G. Espinosa, J. Nucl. Phy. Mat. Sci. Rad. A. 7, 89 (2020). https://doi.org/10.15415/jnp.2020.72010

Downloads

Published

2021-02-10

How to Cite

(1)
Lima Flores, A. .; Palomino-Merino, R. .; Castaño, V. M.; Golzarri, J. I. .; Espinosa, G. Optimization of the Position of the CR-39 Polycarbonate Sheet Inside the Solid State Track Detector “Measuring Device” Through Computational Fluid Dynamics Technique. J. Nucl. Phy. Mat. Sci. Rad. A. 2021, 8, 109-114.

Issue

Section

Articles