Rubber Additions into Concrete and Gamma Radiation Effects on Mechanical Properties and Microwave Absorption Capacity
DOI:
https://doi.org/10.15415/jnp.2017.51019Keywords:
Concrete, Waste tire rubber, Microwave absorption, Gamma radiation, Mechanical properties, Ecological materialsAbstract
Rubber is the indispensable raw material for the manufacture of tires; it is obtained from plants, trees and currently can be produced synthetically. The tire rubber is mixed with compounds such as carbon black, sulfur, cement, paints, antioxidants, oils and fats, steel wire, almost etc., making impossible to recycle the tires itself. In this work, we investigate, the effects of the incorporation of ground rubber in concrete, mixture designed to establish the possibility of being used in the construction industry. The samples of concrete were addition with, 5 vol. %., 15 vol. % and 25 vol. % of rubber. Samples with different rubber addition were irradiated by a cobalt 60 gamma source to study the effect on their mechanical compression properties and microwave absorption capacity. Likewise, the microwave absorption capacity was studied for both irradiated and the non-irradiated. It was found that between 5 vol. % and 15 vol. % of rubber addition change the mechanical properties approximately 25 %, higher rubber additions result in a decrease in a 75 % of its mechanical properties. The fracture behavior is not the expected one due to as the curves of stress vs. strain show a double slope, which is associated with the concrete porosity and rubber content. The aging with the gamma rays generates loss of mechanical properties, especially at lower rubber addition, since at content greater than 15 Vol % the radiation effect is less. These rubber additions allow moderate deformations in compression, thus contributing to the care and preservation of the environment.
Downloads
References
Acosta F. J., Santos J., Suarez O. M. and Pando M.A. (2007) “Raising Awareness on Materials Recycling using Undergraduate Engineering Research,” International Journal of Environment and Pollution, Vol. 31, No. 3/4, pp. 325–341.
Domingo J. Carreira and Kuang-Han Chu, Stress-Strain Relationship for Plain Concrete in Compression, ACI JOURNAL I November-December 1985.
Del Villar Alvelais E., Saneamiento de sitios contaminados con llantas de desecho y gestión de residuos de llantas de desecho, conferencia de legisladores fronterizos. Tampico, tamps., 6 DE MARZO DE 2009
Eldin, N.N., Senouci, A.B., (1993). Rubber-tire particles as concrete aggregates. ASCE, Journal of Materials in Civil Engineering 5 (4), 478–496.
ISHTIAQ A., UMER A., NOUMAN K., Use of Rubber as Aggregate in Concrete: A Review, International Journal of Advanced Structures and Geotechnical Engineering. ISSN 2319-5347, Vol. 04, No. 02, April 2015
Flores L., El Economista (México), 2 de mayo de 2016 (37)
N. Oikonomou* and S. Mavridou, RUBCRETE – RUBBERIZED PORTLAND CEMENT CONCRETE, In: Progress in Sustainable Development Research, pp. 201–214. Nova Science Publishers, Inc. ISBN: 978-1-60021-847-7.
Siddique R., R. Tarun Naik, Properties of concrete containing scrap-tire rubber – an overview, Waste Management 24 (2004) 563–569.
Standard Method of Static Test of Young’s Modulus of Elasticity on Poissons Ratio in compression of Cylindrical Concrete Specimens (ASTM C 469-65). Filadelfia, USA, American Society for Testing and Materials, 1965.
T. Noguchi, F. Tomosawa, Kamran M. Nemati, Bernardino M. Chiaia, and Alessandro P. Fantilli, A Practical Equation for Elastic Modulus of Concrete, ACI Structural Journal/September-October 2009.
Downloads
Published
How to Cite
Issue
Section
License
View Legal Code of the above-mentioned license, https://creativecommons.org/licenses/by/4.0/legalcode
View Licence Deed here https://creativecommons.org/licenses/by/4.0/
Journal of Nuclear Physics, Material Sciences, Radiation and Applications by Chitkara University Publications is licensed under a Creative Commons Attribution 4.0 International License. Based on a work at https://jnp.chitkara.edu.in/ |